Serial LCD Controllers
Use our universal solution, choose your own graphic display
Haidar Technology Serial LCD Controllers (GLC-Mxx) are the fastest and easiest way to add a monochrome graphic display of your choice to your product. The small footprint (smaller than standard credit card) and the 64-pin DIP package allows the user to add the module as piggy-back board to the host controller or to a board mounted on the back of the display.
A simple serial ( RS232 or RS422/485 ) port is all you need to interface the module to your host controller which allows you to access the graphic display as an Intelligent Serial Device.
The module board contains all the necessary hardware to drive and control the display. The on-board microcontroller code includes a GUI library, command interpreter and touch screen calibration/control algorithms. The module board also contains a large flash memory (512Kbyte) for storing bitmaps, images, fonts and GUI objects and a 4-wire touch screen controller.
GooyLCD IDE software allows the user to edit bitmaps, images, fonts and design a graphics-rich GUI application from a desktop computer without writing a single line of code! With GooyLCD IDE you will be able to visually design your GUI program screens (up to 24 screens) using a rich selection of GUI objects. Each screen is compiled by the IDE into a binary file which will be saved in the module EEPROM. By using the Object Run Time Simulation utility, you will be able to simulate and test the objects run time properties before even your hardware and code are ready. For example, you can run an animation on the target display before your host controller code is ready.
Most off-the-shelf monochrome graphic displays on the market now have a built-in graphic controller and most QVGA displays have no graphic controller on board. We take this fact in our consideration during the design phase and we make our modules (firmware and hardware) to be flexible enough to add a new graphic driver as they come to the market with almost no change to the module performance or interface. Our Serial LCD Controllers are built to last.
How does it work?
Step 1: Create your GUI (up to 24 screens) using Haidar Technology GooyLCD IDE software. Edit your own bitmaps and fonts, load images and simulate your GUI from your PC screen. The IDE compiles the GUI into a binary file and saves it into the LCD controller EEPROM. It is simple,fun and fast!
Step 2: Your controller sends high level serial (RS232) commands to control the GUI you just created in step 1. The rich set of powerful object and terminal commands makes controlling the objects easy and simple. No need for RTOS or special library!
Products
GLC-M11
Serial LCD Controller for any monochrome graphic LCD with Toshiba T6963 or compatible graphic controller
- ROHS Complaint
- RS232 TTL interface
- Support for RS422/485 interface
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM reqirements.
GLC-M11 reference manual (PDF)
To get started, order our starter kit # STK-GLCM11 which includes GLC-M11, EVL-GML123, GooyLCD Mono Software.
Ordering information:
__________________________________________________________________
GLC-M21
Serial LCD Controller for monochrome QVGA graphic LCD with no graphic controller built in
- ROHS Complaint
- RS232 TTL interface
- RS422/485 interface support
- Drives 5V and 3.3V displays
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM on board
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM requirements.
GLC-M21 reference manual (PDF)
To get started, order our starter kit # STK-GLCM21 which includes GLC-M21, EVL-GML123, GooyLCD Mono Software.
Ordering information:
___________________________________________________________
GLC-M31
Serial LCD Controller for monochrome graphic LCD with NJU6676, S1D10605, or compatible graphic controller
- ROHS Complaint
- RS232 TTL interface
- RS422/485 interface support
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM on board
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM reqirements.
GLC-M31 reference manual (PDF)
To get started, order our starter kit # STK-GLCM31 which includes GLC-M31, EVL-GML123, GooyLCD Mono Software.
Ordering information:
Haidar Technology Serial LCD Controllers (GLC-Mxx) are the fastest and easiest way to add a monochrome graphic display of your choice to your product. The small footprint (smaller than standard credit card) and the 64-pin DIP package allows the user to add the module as piggy-back board to the host controller or to a board mounted on the back of the display.
A simple serial ( RS232 or RS422/485 ) port is all you need to interface the module to your host controller which allows you to access the graphic display as an Intelligent Serial Device.
The module board contains all the necessary hardware to drive and control the display. The on-board microcontroller code includes a GUI library, command interpreter and touch screen calibration/control algorithms. The module board also contains a large flash memory (512Kbyte) for storing bitmaps, images, fonts and GUI objects and a 4-wire touch screen controller.
GooyLCD IDE software allows the user to edit bitmaps, images, fonts and design a graphics-rich GUI application from a desktop computer without writing a single line of code! With GooyLCD IDE you will be able to visually design your GUI program screens (up to 24 screens) using a rich selection of GUI objects. Each screen is compiled by the IDE into a binary file which will be saved in the module EEPROM. By using the Object Run Time Simulation utility, you will be able to simulate and test the objects run time properties before even your hardware and code are ready. For example, you can run an animation on the target display before your host controller code is ready.
Most off-the-shelf monochrome graphic displays on the market now have a built-in graphic controller and most QVGA displays have no graphic controller on board. We take this fact in our consideration during the design phase and we make our modules (firmware and hardware) to be flexible enough to add a new graphic driver as they come to the market with almost no change to the module performance or interface. Our Serial LCD Controllers are built to last.
How does it work?
Step 1: Create your GUI (up to 24 screens) using Haidar Technology GooyLCD IDE software. Edit your own bitmaps and fonts, load images and simulate your GUI from your PC screen. The IDE compiles the GUI into a binary file and saves it into the LCD controller EEPROM. It is simple,fun and fast!
Step 2: Your controller sends high level serial (RS232) commands to control the GUI you just created in step 1. The rich set of powerful object and terminal commands makes controlling the objects easy and simple. No need for RTOS or special library!
Products
GLC-M11
Serial LCD Controller for any monochrome graphic LCD with Toshiba T6963 or compatible graphic controller
- ROHS Complaint
- RS232 TTL interface
- Support for RS422/485 interface
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM reqirements.
GLC-M11 reference manual (PDF)
To get started, order our starter kit # STK-GLCM11 which includes GLC-M11, EVL-GML123, GooyLCD Mono Software.
Ordering information:
| Product # |
| GLC-M11 |
GLC-M21
Serial LCD Controller for monochrome QVGA graphic LCD with no graphic controller built in
- ROHS Complaint
- RS232 TTL interface
- RS422/485 interface support
- Drives 5V and 3.3V displays
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM on board
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM requirements.
GLC-M21 reference manual (PDF)
To get started, order our starter kit # STK-GLCM21 which includes GLC-M21, EVL-GML123, GooyLCD Mono Software.
Ordering information:
| Product # |
| GLC-M21 |
GLC-M31
Serial LCD Controller for monochrome graphic LCD with NJU6676, S1D10605, or compatible graphic controller
- ROHS Complaint
- RS232 TTL interface
- RS422/485 interface support
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM on board
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM reqirements.
GLC-M31 reference manual (PDF)
To get started, order our starter kit # STK-GLCM31 which includes GLC-M31, EVL-GML123, GooyLCD Mono Software.
Ordering information:
| Product # |
| GLC-M31 |
