Embedded GUI Boards for Color Displays
The SegeMax Board provides a complete Graphical User interface controller for embedded systems. SegeMax includes everything you need to drive TFT LCD (up to 800X480 and at 16bpp) with touch panel. It just needs to be attached to a simple display interface board and the human interface is ready for production. It is based on our intelligent and easy to use graphic engine “SEGE” (Serial Enabled Graphic Engine). SEGE uses the same techniques used in objective oriented programming (OOP) to create the embedded GUI without any additional code for the LCD or the touch panel. A powerful set of objects and a window based software “LCDMaster” are used to make this task extremely easy, fast and simple.
LCDMaster is a true WYS|WYG visual GUI builder for color displays. It allows you to design the GUI application visually from your PC screen using simple Drag-and-Drop tools with absolutely no coding for the GUI design. Using SegeMax is simply the quickest way to create stunning GUI without any graphical programming!
_____________________________________________________
SegeMax (Serial Color LCD Controller)
- Can drive any TFT Color LCD up to WVGA (800X480) and at 16BPP color depth
- Powerful 32-bit processor running at 80MHZ on board
- Powerful graphic controller with 1024KB RAM on board
- Powerful resistive touch screen and 4X4 keypad controller on board
- 16Mbyte Flash memory for bitmaps, fonts and GUI storage
- 7-bit, 100K (128 levels) Digital Pot for software brightness control
- CMOS (3.3V) RS232 and RS485 up to 115.2kb/sec serial interface
- 3 layers of graphic with Alpha blending and transparency
- Single Power supply operation (3.3V)
- Small size 50X76 mm
- Low Cost
- ROHS Compliant
SegeMax Software Manual (PDF)
SegeMax Hardware Manual (PDF)
Ordering Information:
All prices in American Dollars. Please contact sales for volume discounts.
|
Product Number |
1 - 9 |
| SegeMax | $119 |
____________________________________________________________________
SegeMax-LCD
SegeMax-LCD with SegeMax board is a production ready display controller board for many popular LCD panels ranging from 4.3” to 10.4” with resolutions up 800x480 (WVGA). SegeMax-LCD provides greater speed in prototyping, maximizes design flexibility while shortening the time to market. It is a carrier board for our popular SegeMax GUI controller board with a full support for LED and CCFL backlight control. Also, it contains many connections for the LCD and the touch screen.
- Very efficient DC/DC booster for the LED back light
- Full support for many CCFL DC/AC converter with or without dimming function.
- Brightness can be controlled by SegeMax digital pot.
- 33 pin FPC connector and auxiliary pads for the LCD interface
- 4 pin FPC connector and auxiliary pads for the touch screen interface
- 16 pin IDC connector and auxiliary pads for the host interface
- Auxiliary pads for the 4X4 Keypad interface
- Jumpers for the LCD vertical and horizontal scanning direction
- Single Power supply operation (3.3V) for LED back light
- Dual Power supply operation (3.3V) and 5V/12V for CCFL back light
- Optional Composite Video and S-Video output.
Sege-LCD Hardware Manual (PDF)
Ordering Information:
All prices in American Dollars. Please contact sales for volume discounts.
|
Product Number |
1 - 9 |
| SegeMax-LCD | $59 |
SegeMax-VGA (Standard 15-pin VGA Output)
SegeMax-VGA with SegeMax board is a production ready PC monitor controller board. It is a carrier board for our popular SegeMax GUI controller board with VGA output. The resolution is fixed to VGA (640X480) and it can drive any monitor or TV with VGA input. Touch screen is also possible through on board connector.
- Standard VGA output connector
- Triple 8-Bit High Speed Video DAC
- RS-343A/RS-170 Compatible Output
- Diode Protected Outputs
- 4 pin FPC connector and auxiliary pads for the touch screen interface
- 16 pin IDC connector and auxiliary pads for the host interface
- Auxiliary pads for the 4X4 Keypad interface
- Single Power supply operation (3.3V)
- Optional Composite Video and S-Video output
Ordering Information:
All prices in American Dollars. Please contact sales for volume discounts.
|
Product Number |
1 - 9 |
| SegeMax-VGA | $59 |
EVL-CL3 with USB To RS232 converter (NEW!)
EVL-CL3 board allows you to evaluate SegeMax-LCD, SegeMax-VGA or any MAX-xxx display module fast and easy. It has a 3.3V DC/DC converter, RS232 level converter and USB To Serial converter (FT232R)
. - 3.3V power supply
- USB To RS232 converter (FT232R)
- RS232, UART or USB interface.
- RS232 level converter
- Buzzer and Status LEDs
- 16 pin IDC connector and auxiliary pads for the host interface
- 0.1" prototype area.
EVL-CL3 Schematic (PDF)
Ordering Information:
All prices in American Dollars. Please contact sales for volume discounts.
|
Product Number |
1 - 9 |
| EVL-CL3 | $69 |
______________________________________________________
Haidar Technology Serial LCD Controllers (GLC-Mxx) are the fastest and easiest way to add a monochrome graphic display of your choice to your product. The small footprint (smaller than standard credit card) and the 64-pin DIP package allows the user to add the module as piggy-back board to the host controller or to a board mounted on the back of the display.
A simple serial ( RS232 or RS422/485 ) port is all you need to interface the module to your host controller which allows you to access the graphic display as an Intelligent Serial Device.
The module board contains all the necessary hardware to drive and control the display. The on-board microcontroller code includes a GUI library, command interpreter and touch screen calibration/control algorithms. The module board also contains a large flash memory (512Kbyte) for storing bitmaps, images, fonts and GUI objects and a 4-wire touch screen controller.
GooyLCD software allows the user to edit bitmaps, images, fonts and design a graphics-rich GUI application from a desktop computer without writing a single line of code! With GooyLCD IDE you will be able to visually design your GUI program screens (up to 24 screens) using a rich selection of GUI objects. Each screen is compiled by the IDE into a binary file which will be saved in the module EEPROM. By using the Object Run Time Simulation utility, you will be able to simulate and test the objects run time properties before even your hardware and code are ready. For example, you can run an animation on the target display before your host controller code is ready.
GLC-M11
Serial LCD Controller for any monochrome graphic LCD with Toshiba T6963 or compatible
- ROHS Complaint- RS232 TTL interface
- Support for RS422/485 interface
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM reqirements.
GLC-M11 reference manual (PDF)
To get started, order our evaluation kit # EVL-GLCM11 which includes GLC-M11, EVL-GML12, GooyLCD Mono Software.
Ordering information:
All prices in American Dollars. Please contact sales for volume discounts.
|
Product Number |
1 - 9 |
| GLC-M11 | $69 |
________________________________________________________________________________
GLC-M21
Serial LCD Controller for monochrome QVGA graphic LCD with no graphic controller
- ROHS Complaint
- RS232 TTL interface
- RS422/485 interface support
- Drives 5V and 3.3V displays
- Digitally controlled contrast
- Digitally controlled brightness
- Digitally controlled backlight ON/OFF
- 512Kbyte EEPROM on board
- Touch screen controller on board
- 3 analog channels for chart update (Oscillscope Mode)
- 6 Proportional fonts
- Rich selection of Precoded GUI Objects
- Small footprint 82.3 X 42.3mm
- Reliable and Fast
- Noise Immunity ( 4 layer board )
- Can be modified for specific OEM requirements.
GLC-M21 reference manual (PDF)
To get started, order our evaluation kit # EVL-GLCM21 which includes GLC-M21, EVL-GML12, GooyLCD Mono Software.
Ordering information:
All prices in American Dollars. Please contact sales for volume discounts.
|
Product Number |
1 - 9 |
| GLC-M21 | $79 |
____________________________________________________________________
EVL-ML1
EVL-ML1 allows you to evaluate any any of sLCD-xSGC monochrome display modules fast and easy. It has +5V power supply and RS232 level converter
- 5V DC/DC converter
- RS232 Level converter
- Status LEDs
- 16 pin IDC connector and auxilary pads for host interface
- 0.1" prototype area
EVL-ML1 Shematic (PDF)
|
Product Number |
1 - 9 |
| EVL-ML1 | $59 |
____________________________________________________________________
EVL-GLC12
EVL-GLC12 is a carrier board for GLC-M11 and GLC-M21. With EVL-GLC12, you will be able to evaluate many different QVGA monochrome displays and many with Toshiba T6963 or compatible graphic controller. It has many connectors and auxiliary pads to connect your display to to EVL-GLC12. It is a great tool to test the display before building your hardware!
- Accept GLC-M11 or GLC-M21
- 5V power supply
- RS232 DSUB connector
- RS422 connector (optional)
- CCFL AC/DC converter (optional)
- Status LEDs
- Buzzer on board
EVL-GLC21 Manual (PDF)
Ordering information:
All prices in American Dollars. Please contact sales for volume discounts.
|
Product # |
1 - 9 |
| EVL-GLC12 | $99 |
