HAIDAR TECHNOLOGY
Innovative measurement and control solutions for OEMs
GUI LCD Modules
Use our universal solution, choose your own graphic display.
Haidar Technology Graphical User Interface (GUI) LCD Modules (GLC-Mxx) are the fastest and easiest way to add a monochrome graphic display of your choice to your product. The small footprint (smaller than standard credit card) and the 64-pin DIP package allows the user to add the module as piggy-back board to the host controller or to a board mounted on the back of the display.
A simple serial ( RS232 or RS422/485 ) port is all you need to interface the module to your host controller which allows you to access the graphic display as an Intelligent Serial Device.
The module board contains all the necessary hardware to drive and control the display. The on-board microcontroller code includes a GUI library, command interpreter and touch screen calibration/control algorithms. The module board also contains a large flash memory (512Kbyte) for storing bitmaps, images, fonts and GUI objects and a 4-wire touch screen controller.
GooyLCD IDE software allows the user to edit bitmaps, images, fonts and design a graphics-rich GUI application from a desktop computer without writing a single line of code! With GooyLCD IDE you will be able to visually design your GUI program screens ( up to 24 screens ) using a rich selection of GUI objects. Each screen is compiled by the IDE into a binary file which will be saved in the module EEPROM. By using the Object Run Time Simulation utility, you will be able to simulate and test the objects run time properties before even your hardware and code are ready. For example, you can run an animation on the target display before your host controller code is ready.
Most off-the-shelf monochrome graphic displays on the market now have a built-in graphic controller and most QVGA displays have no graphic controller on board. We take this fact in our consideration during the design phase and we make our modules (firmware and hardware) to be flexible enough to add a new graphic driver as they come to the market with almost no change to the module performance or interface. Our GUI LCD Modules are built to last.
Haidar Technology Graphical User Interface (GUI) LCD Modules (GLC-Mxx) are the fastest and easiest way to add a monochrome graphic display of your choice to your product. The small footprint (smaller than standard credit card) and the 64-pin DIP package allows the user to add the module as piggy-back board to the host controller or to a board mounted on the back of the display.
A simple serial ( RS232 or RS422/485 ) port is all you need to interface the module to your host controller which allows you to access the graphic display as an Intelligent Serial Device.
The module board contains all the necessary hardware to drive and control the display. The on-board microcontroller code includes a GUI library, command interpreter and touch screen calibration/control algorithms. The module board also contains a large flash memory (512Kbyte) for storing bitmaps, images, fonts and GUI objects and a 4-wire touch screen controller.
GooyLCD IDE software allows the user to edit bitmaps, images, fonts and design a graphics-rich GUI application from a desktop computer without writing a single line of code! With GooyLCD IDE you will be able to visually design your GUI program screens ( up to 24 screens ) using a rich selection of GUI objects. Each screen is compiled by the IDE into a binary file which will be saved in the module EEPROM. By using the Object Run Time Simulation utility, you will be able to simulate and test the objects run time properties before even your hardware and code are ready. For example, you can run an animation on the target display before your host controller code is ready.
Most off-the-shelf monochrome graphic displays on the market now have a built-in graphic controller and most QVGA displays have no graphic controller on board. We take this fact in our consideration during the design phase and we make our modules (firmware and hardware) to be flexible enough to add a new graphic driver as they come to the market with almost no change to the module performance or interface. Our GUI LCD Modules are built to last.
| Product Number | Description |
| GLC-M11 | |
 |
Drive/Control any monochrome graphic display with Toshiba T6963, T6963C or compatible graphic controller Data Sheet Specifications: - ROHS Complaint - RS232 TTL interface - RS422/485 interface support - Digitally controlled contrast - Digitally controlled brightness (LED backLight) - Digitally controlled backlight ON/OFF - 512Kbyte EEPROM for fonts, bitmaps and GUI storage - 4 wire resistive touch screen controller - Output control signals for Buzzer, Alarm LED, Heart Beat LED and communication status - 3 analog channels for chart update (Oscillscope Mode) - 6 Proportional fonts - Rich selection of Precoded GUI Objects (ListBox, TextBox, Label, CheckBox, RadioButton, TextField, Form, Button, Chart, BarGraph, Slider, LinearGage, NumberBox, Bitmap, Animation, ImageSeq, Line, Circle, Ellipse, Rectangle) - Small footprint 82.3 X 42.3mm - Reliable and Fast ( No dynamic memory assigment, No floating point math ) - Noise Immunity ( 4 layer board ) - Can be modified for specific OEM reqirements. |
| GLC-M21 | |
 |
Drive/Control any QVGA (320X240)monochrome graphic display with no graphic controller built-in Data Sheet Specifications: - ROHS Complaint - RS232 TTL interface - RS422/485 interface support - Drives 5V and 3.3V displays - Digitally controlled contrast - Digitally controlled brightness (LED backLight) - Digitally controlled backlight ON/OFF - 512Kbyte EEPROM for fonts, bitmaps and GUI storage - 4 wire resistive touch screen controller - Output control signals for Buzzer, Alarm LED, Heart Beat LED and communication status - 3 analog channels for chart update (Oscillscope Mode) - 6 Proportional fonts - Rich selection of Precoded GUI Objects ( ListBox, TextBox, Label, CheckBox, RadioButton, TextField, Form, Button, Chart, BarGraph, Slider, LinearGage, NumberBox, Bitmap, Animation, ImageSeq, Line, Circle, Ellipse, Rectangle) - Small footprint 82.3 X 42.3mm - Reliable and Fast ( No dynamic memory assigment, No floating point math ) - Noise Immunity ( 4 layer board ) - Can be modified for specific OEM requirements. |
| GLC-M31 | |
 |
Drive/Control any monochrome graphic display with New Japan Radio NJU6676, Epson S1D10605 or compatible graphic controller Data Sheet Specifications: - ROHS Complaint - RS232 TTL interface - RS422/485 interface support - Consistent contrast across the display ( Built-in stable power supply for V1-V5) - Optumize for Optrex F-51851, 51852 series - Digitally controlled contrast - Digitally controlled brightness (LED backLight) - Digitally controlled backlight ON/OFF - 512Kbyte EEPROM for fonts, bitmaps and GUI storage - 4 wire resistive touch screen controller - Output control signals for Buzzer, Alarm LED, Heart Beat LED and communication status - 3 analog channels for chart update (Oscillscope Mode) - 6 Proportional fonts - Rich selection of Precoded GUI Objects ( ListBox, TextBox, Label, CheckBox, RadioButton, TextField, Form, Button, Chart, BarGraph, Slider, LinearGage, NumberBox, Bitmap, Animation, ImageSeq, Line, Circle, Ellipse, Rectangle) - Small footprint 82.3 X 42.3mm - Reliable and Fast ( No dynamic memory assigment, No floating point math ) - Noise Immunity ( 4 layer board ) - Can be modified for specific OEM requirements. |
